Product Description

BlastX 108 Dustless Abrasive Blasting

BlastX 108 is a wet blasting additive that decreases the surface tension, & allows it to get into the pores of the metal, removing ALL contamination, including salts, grease, acids, abrasives, light oils & greases.

BlastX 108 evaporates with the blast or pressure washer water, leaving a perfectly clean metal surface, ready for painting. A perfectly clean surface dosn’t rust, & it also greatly extends the life of nearly any protective coating applied to the metal.

BlastX 108 is made right here in Australia & can be used in any water in blast pot machine including  but not limited to the following:

  • Dustless Blasting
  • Rapid Blast
  • Quill Falcon

Simply add BlastX 108 to the blast pot at a ratio of 1 part BlastX 108 to 100 parts water. We recommend  also cleaning off excess blast residue at the end of the blasting cycle with a pressure washer, with BlastX 108 added to the pressure washer water, also at a ratio of 100:1 for a perfectly clean, ready to paint surface. Painting should be done within 48 hours, however in the right weather conditions can be stretched out to 72 hours.

BlastX 108 can also be used with other wet blasting systems such as Graco Ecoquip & Wet Ring dustless blasting systems.

In addition to dustless / wet abrasive blasting, BlastX 108 can also be used when pressure washing parts after dry abrasive blasting, & soda blasting. By using BlastX 108 along with pressure cleaning the parts after dry abrasive blasting, the service life of any protective coating applied afterwards will be greatly increased. The combination of BlastX 108 with pressure washing will completely remove any blast residue, including salts, grease, acids, abrasives, light oils & greases

BlastX 108 is available in 4kg jerry can bottles, 20kg Cube drums, 205 litre drums, or 1000 litre IBC’s. The product can be shipped virtually anywhere in Australia. See our online shop for pricing & availability.

Sand blasting steel